Thanks for updating FireCut!
Opens in your browser
Warning: Undo will roll back all changes in the current sequence back to the following state. A copy of the current sequence will be saved in the "FireCut" bin. Please proceed with caution.
| Sequence name: | (unknown) |
| Undo state time: | (unknown) |
| Comments: | (unknown) |
Remove silences
?
See documentation (opens in your browser)
Cuts out silences from ALL tracks, based on the audio from the selected guidance track(s).
Cuts out silences from your video.
Silence cutting tightness
Loose cut
Default
Tight cut
Scope
?
Which part of your sequence to operate on. If using "In/Out points", you MUST set an "In point" and an "Out point" on your sequence (hotkeys:
I and O)
Speech detection 🧪 Experimental
Not currently supported on Apple Silicon Macs
Analysis format
?
FireCut can carry out the silences analysis in WAV or MP3 formats. MP3 is the recommended default because it uses less memory, however you may encounter long encoding times. If this happens, try switching to WAV.
Cutting algorithm
Experimental - may produce unexpected results if sequence contains caption tracks, markers, or other unsupported items
Operation
Video tracks
Remove silences
?
See documentation (opens in your browser)
Cuts out silences from ALL tracks, based on the audio from the selected guidance track(s).
Cuts out silences from your video.
Looking for the dB threshold and duration settings?
You can now adjust them after analysis for better control and fine-tuning!
You can now adjust them after analysis for better control and fine-tuning!
Silence threshold
dBFS
Minimum silence duration
ms
Scope
?
Which part of your sequence to operate on. If using "In/Out points", you MUST set an "In point" and an "Out point" on your sequence (hotkeys:
I and O)
Speech detection 🧪 Experimental
Not currently supported on Apple Silicon Macs
Analysis format
?
FireCut can carry out the silences analysis in WAV or MP3 formats. MP3 is the recommended default because it uses less memory, however you may encounter long encoding times. If this happens, try switching to WAV.
Remove silences
?
See documentation (opens in your browser)
Cuts out silences from ALL tracks, based on the audio from the selected guidance track(s).
Cuts out silences from your video.
Silence threshold
dBFS
Minimum silence duration
ms
Padding
?
Padding adds some "breathing room" when making cuts. Increase it to leave a bit of silence at each cut. Note: FireCut will ignore any silences that are shorter than the padding.
Start
ms
End
ms
?
Give your cuts an artistic flair by making J-cuts. The offset indicates how many frames earlier the audio should come in, compared to the video.
Offset
frames
Cutting algorithm
If cutting is slow, try switching algorithms
Operation
Video tracks
[ERROR]
silences to cut
([unknown] ignored)
?
Silences which are shorter than padding are not cut. You can adjust the padding in the settings above to include/exclude silences.
Note: Removing 100+ silences can be a slow process. Use the "Turbo" cutting algorithm above for fastest results.
Preview
Zoom out
100%
Zoom in
= Section to be deleted
Blue
= Not completely silent, but no speech detected.
|
Silence Start
Silence End
|
|---|
Remove fillers
?
See documentation (opens in your browser)
Cuts out filler words (umm, uhh, etc.) from ALL tracks, based on the audio from the selected guidance track(s).
For best results:
- Cut out any silences first!
- Ensure your audio is clear, loud and in English
- Only select the relevant audio tracks below
Scope
?
Which part of your sequence to operate on. If using "In/Out points", you MUST set an "In point" and an "Out point" on your sequence (hotkeys:
I and O)
Filler words coverage
Randomness
?
Increasing randomness increases chances of finding filler words, however very large values might generate 'false positives' (find filler words where they don't exist)
30%
Timestamping strategy
?
What approach to use for finding word timestamps
Language 🧪 Experimental
Remove fillers
?
See documentation (opens in your browser)
Cuts out filler words (umm, uhh, etc.) from ALL tracks, based on the audio from the selected guidance track(s).
Timing adjustment
✨ New
Padding (start)
?
Padding adds some "breathing room" when making cuts.
Increase it to cut LESS and make the cut tighter.
Reduce it to cut MORE and cut a bit extra around the filler word.
Default = 0ms
Hint: You can select a word from the transcript below first, then change the padding to see how it will affect the cut.
Increase it to cut LESS and make the cut tighter.
Reduce it to cut MORE and cut a bit extra around the filler word.
Default = 0ms
Hint: You can select a word from the transcript below first, then change the padding to see how it will affect the cut.
ms
Padding (end)
?
Padding adds some "breathing room" when making cuts.
Increase it to cut LESS and make the cut tighter.
Reduce it to cut MORE and cut a bit extra around the filler word.
Default = 0ms
Hint: You can select a word from the transcript below first, then change the padding to see how it will affect the cut.
Increase it to cut LESS and make the cut tighter.
Reduce it to cut MORE and cut a bit extra around the filler word.
Default = 0ms
Hint: You can select a word from the transcript below first, then change the padding to see how it will affect the cut.
ms
Bridge empty space between words
Filler words
✨ New
Results
Left-click: Go to word
Right-click: Mark/unmark for removal
This is the transcript before we get better timestamps
Getting timestamps
Upgrading timing accuracy
Add zooms
?
See documentation (opens in your browser)
Adds zoom cuts at specific intervals to emphasize certain words, based on what is being spoken.
For best results:
- Ensure your audio does not have repetitions / multiple takes
- Ensure your audio is clear and loud
- Mute any tracks with music / sound effects
Zooms trigger
?
Choose when to add zooms:
Key phrases (default): Zoom in when speaker is saying something important.
Every other cut: Zoom into every other clip (specify which video track to analyze).
Every other sentence: Zoom into every other sentence being spoken.
Key phrases (default): Zoom in when speaker is saying something important.
Every other cut: Zoom into every other clip (specify which video track to analyze).
Every other sentence: Zoom into every other sentence being spoken.
Guidance video track
?
Specify which track to analyze to find clips. A zoom will be applied at every other clip on this track.
Zoom frequency
Low (less frequent)
High (very frequent)
Zoom style
Scale
120
Center point
Default position
Zoom curve
✨ New
Presets:
Click curves to change shape, drag edges to change duration
0.6 sec
0.6 sec
Scope
?
Which part of your sequence to operate on. If using "In/Out points", you MUST set an "In point" and an "Out point" on your sequence (hotkeys:
I and O)
Target video track
?
Zoom clips will be added to this track. Any existing clips on this track may be deleted in the process.
Language
?
This is the language of your audio. Please note non-English support is currently experimental. For convenience, you can set the default language in the Settings menu to avoid changing this every time.
Add zooms
?
See documentation (opens in your browser)
Adds zoom cuts at specific intervals to emphasize certain words, based on what is being spoken.
- To modify an existing zoom: Drag zoom start/end handles
- To add a new zoom: Select a portion of text, then click "Add new zoom"
- To delete a zoom: Click on a yellow highlight, then click "Delete"
- Tip: You can also modify and delete the zoom clips directly in your sequence
Add new zoom
✏️ Edit Zoom
DeleteEdit zoom settings
Add chapters
?
See documentation (opens in your browser)
Detects chapters based on what is being spoken. Produces a list you can review, and then adds them as markers and/or clips to the timeline.
Detection takes approx. 2 mins for every 10 mins of audio.
Chapters count
✨ New?
Control the approximate number of chapters detected. Set both ends to extremes for Auto.
Auto
Scope
?
Which part of your sequence to operate on. If using "In/Out points", you MUST set an "In point" and an "Out point" on your sequence (hotkeys:
I and O)
Language
?
This is the language of your audio. Please note non-English support is currently experimental. For convenience, you can set the default language in the Settings menu to avoid changing this every time.
?
Also suggest titles and description to use for your video when posting to social media.
Title and description
Title
🧐
🧐 Curiosity
😱
😱 Fear
🔥
🔥 Desire
Description
Title
🧐
🧐 Curiosity
😱
😱 Fear
🔥
🔥 Desire
Description
Chapters
| Chapter name | hh:mm:ss |
|---|
Markers
?
Adds a marker in your timeline for every chapter. These can be helpful for cutting / aligning your footage, adding B-roll and syncing music.
Marker colour
Chapter clips
?
Adds a divider clip for every chapter (on a new track).
Text colour
Loading chapter clips
Error while loading chapter clips
Note: Adding clips is not supported on Premiere Pro 2022, and may not work reliably in some languages.
Remove repetition
?
See documentation (opens in your browser)
Detects parts of your sequence where you have repeated phrases. Produces a list you can review to cut out bad takes.
Mode
?
For quick operation, choose Basic. For more control and fine-tuning, choose Advanced.
Scope
?
Which part of your sequence to operate on. If using "In/Out points", you MUST set an "In point" and an "Out point" on your sequence (hotkeys:
I and O)
Language
?
This is the language of your audio. Please note non-English support is currently experimental. For convenience, you can set the default language in the Settings menu to avoid changing this every time.
Remove repetition
?
See documentation (opens in your browser)
Detects parts of your sequence where you have repeated phrases. Produces a list you can review to cut out bad takes.
Minimum phrase size
?
The minimum number of words that need to be repeated to be detected as a "match". Increase to ignore short repeated phrases.
8 words
Tolerance
?
The sensitivity of detecting a match. Increase to find even loosely repeated phrases, or decrease to only find very strict matches (of exact repetitions).
0% = only exact phrase will match
0% = only exact phrase will match
50%
Search radius
?
How far away to look for a match. Increase to find matches even far away, or decrease to find matches only in the close neighbourhood of each phrase.
50
words
Extend last occurrence of each phrase
?
How to decide where to mark the end the last occurrence of each phrase (since there isn't a "next" occurence of the same phrase to mark its end).
Transcript view (0 repeated phrases found) No repetitions found! Try changing settings
Remove repetition
?
See documentation (opens in your browser)
Detects parts of your sequence where you have repeated phrases. Produces a list you can review to cut out bad takes.
Click on
✓
to accept a specific take and
DELETE all other takes for that phrase.
Or use one of the following tools to accept takes in bulk:
(No more repetitions found)
Multi-track
?
See documentation (opens in your browser)
Edits a multi-track sequence (such as a podcast)
Speakers
A1:
A2:
Video
Video 1:
Video 2:
Video 3:
Scope
?
Which part of your sequence to operate on. If using "In/Out points", you MUST set an "In point" and an "Out point" on your sequence (hotkeys:
I and O)
Multi-track
?
See documentation (opens in your browser)
Edits a multi-track sequence (such as a podcast).
Note: As you change the settings, you can see a live preview of the planned cuts below!
Speaker switching frequency
?
How "sensitive" to be when switching between speakers. Increase to switch more often (as soon as another speaker becomes louder than the current speaker), or decrease to switch less often.
50%
Minimum shot duration
?
The minimum duration of each shot that FireCut will recommend. Any cuts shorter than this will be ignored.
Increase to prevent rapid switches between shots. Decrease for a more fast-paced edit.
Increase to prevent rapid switches between shots. Decrease for a more fast-paced edit.
2s
No wide shots available
Preference for wide shots
?
What percentage (%) of your total video should use wide shots.
0%: no wide shots (except if using cutaways below)
100%: only wide shots
0%: no wide shots (except if using cutaways below)
100%: only wide shots
0%
0%
?
Break up long shots with cutaways to other cameras. Good for adding variety and showing reactions of other people.
Max shot duration
?
If a speaker talks for longer than this limit, adds a
"cutaway" to a different clip to add some variety, before coming back to the original speaker. If you have shots with multiple speakers and want to show them more often, reduce
this limit.
60 sec
Cutaway shot duration
?
Whenever there is a cutaway (determined using the
max shot duration
above), this setting determines how long that cutaway should last.
2-4 sec
Cutaway video tracks
?
Which video tracks to cutaway from and to.
Recommended settings:
Recommended settings:
- From: Select everything except wide shots.
- To: Select wide shots.
From
To
?
Apply a manual boost/suppression to certain speakers to increase/decrease their prominence in the final edit. This is only for deciding cuts, and does NOT affect the actual audio.
Speaker name
0 dB
Cutting operation
?
Whether to disable ("grey out") or delete the video clips that are not being focused on.
- Disable if you want an easy way to bring them back later
- Delete if you want a cleaner timeline with fewer clips
- Disable if you want an easy way to bring them back later
- Delete if you want a cleaner timeline with fewer clips
✨New
?
Mutes any speaker who is not in the active shot (video track). Useful for ensuring that other people don't talk over the current speaker.
Please use with care, as it may create sharp mute/unmute cuts in your audio tracks.
Note: For wide shots, it will unmute all speakers in that wide shot. Cutaways do NOT affect the muting behaviour and are ignored for this analysis, because cutaways are not triggered by audio.
Please use with care, as it may create sharp mute/unmute cuts in your audio tracks.
Note: For wide shots, it will unmute all speakers in that wide shot. Cutaways do NOT affect the muting behaviour and are ignored for this analysis, because cutaways are not triggered by audio.
Share of total screen-time
✨New
?
Automatically balances speakers (and wides if present) to fair shares. If wides exist, targets equal shares for N speakers plus a Wide bucket.
Gives a visual indication of what % share of the video is taken by each speaker. This is not a timeline view.
Preview of cuts (click to go to time)
Change the settings above to update this table.
| Speaker | Shot | Video |
Start
End
|
Duration |
|---|---|---|---|---|
| 1 |
Multi-track
?
See documentation (opens in your browser)
Disables audio tracks when they become quiet (to reduce background noise)
Threshold (dB) method
dBFS
Scope
?
Which part of your sequence to operate on. If using "In/Out points", you MUST set an "In point" and an "Out point" on your sequence (hotkeys:
I and O)
Video tracks
Analysis format
?
FireCut can carry out the silences analysis in WAV or MP3 formats. MP3 is the recommended default because it uses less memory, however you may encounter long encoding times. If this happens, try switching to WAV.
Cutting algorithm
Add captions
?
See documentation (opens in your browser)
Transcribes your audio so you can create / export captions.
For best results, first:
- Remove unnecessary silences
- Remove repetitions
Scope
?
Which part of your sequence to operate on. If using "In/Out points", you MUST set an "In point" and an "Out point" on your sequence (hotkeys:
I and O)
Audio language
?
Guidance prompt
?
[Optional] Provide custom spellings (of names, brands, technical terms) to guide transcription.
Example: If your transcription shows "fire cut", you can enter "FireCut" in this field to guide the transcription to use the correct spelling.
Example: If your transcription shows "fire cut", you can enter "FireCut" in this field to guide the transcription to use the correct spelling.
✨ New
🧪 Experimental
History
Add captions
?
See documentation (opens in your browser)
Transcribes your audio so you can create / export captions.
Caption loading status
?
If you didn't select all captions when clicking "Edit selected captions", only the captions corresponding to the selected images are loaded. If you want to load the entire transcript, click the button provided.
Transcript from
[]
to
[]
loaded (based on selected captions)
Full transcript loaded
?
- Styled: Customise fonts, colours, animations and export as images
- Text-only: Export as a Captions track (PPro 2022+) or subtitle text file (SRT)
- Text-only: Export as a Captions track (PPro 2022+) or subtitle text file (SRT)
?
Manually adjust how captions are broken into lines. Leave unchecked to use the default breaks from the transcript (breaks done this way are typically phrase-level).
Max words per line
words
Max characters per line
characters
?
Sometimes your transcript will have undesirable gaps between words. This feature helps you adjust the "end" times of the words in your transcript.
Extend to next word is only available for Styled captions.
Extend to next caption will keep your caption visible until the next caption starts.
Extend to next word is only available for Styled captions.
Extend to next caption will keep your caption visible until the next caption starts.
?
Remove punctuation and modify capitalisation of your captions.
Preview (click to go to time)
To edit text, add captions track to sequence then go to Premiere Pro's "Text" panel.
Add captions
?
See documentation (opens in your browser)
Transcribes your audio so you can create / export captions.
Caption loading status
?
If you didn't select all captions when clicking "Edit selected captions", only the captions corresponding to the selected images are loaded. If you want to load the entire transcript, click the button provided.
Transcript from
[]
to
[]
loaded (based on selected captions)
Full transcript loaded
?
- Styled: Customise fonts, colours, animations and export as images
- Text-only: Export as a Captions track (PPro 2022+) or subtitle text file (SRT)
- Text-only: Export as a Captions track (PPro 2022+) or subtitle text file (SRT)
Preview (click to reposition)
Line 1
Word 1
Note: Some animations may not show correctly in preview:
Preview (click to go to time)
To edit text, add captions track to sequence then go to Premiere Pro's "Text" panel.
Edit transcript (waiting for transcription)
Edit transcript
See more...
- Click on a word to edit it
- Click the / between words to toggle line breaks
- Tip: You can press Tab to cycle between words
- Tip: Changing other settings (such as font size) can affect the automatic line breaks but your custom line breaks will always apply
Painting with emphasis style 1
- Click any word to give it emphasis style 1
- Click a word again to remove emphasis
Find and replace
Find
Replace
Presets
?
Scale preset properties (such as font size) based on the sequence size, so that each preset looks the same regardless of sequence size.
Font
Name
Size
px
Weight
Alignment
Colour
Direction
280°
StyleNew
Letter spacing
%
Word spacing
%
Line spacing
%
✨ New
?
Emphasize certain words in your captions with a different style. You can define multiple emphasis styles. Each style can override the base style's font, shadow, and outline.
Use "Detect words with AI" to automatically detect words in your captions, or scroll up to the "Edit transcript" menu and select emphasis words yourself.
Use "Detect words with AI" to automatically detect words in your captions, or scroll up to the "Edit transcript" menu and select emphasis words yourself.
Width
px
Colour
Size X
px
Size Y
px
Y-offset
%
Round
px
Opacity
%
Colour
Direction
90°
Opacity
%
Offset
px
Blur
?
Note: If shadows look too light (washed out) in your sequence, go to
Sequence → Sequence Settings → Turn off "Composite in Linear Light".
px
Spread
Colour
Direction
135°
?
Displays emojis besides captions. Use the Auto-detect emojis button to recommend emojis based on your transcript. Emojis can be added, changed and removed from the Edit transcript
panel above
Note: Currently this feature is not compatible with the Turbo algorithm
Note: Currently this feature is not compatible with the Turbo algorithm
Emojis may be subject to copyright depending on the library used. Please check the terms and conditions for the library used in the context of your intended usage.
Auto-detect emojis...
Emojis auto-detected
Size
Position
Library
Animation
?
Randomly shakes (wiggles) your caption to add motion.
Note: Currently this feature is not compatible with the Turbo algorithm
Note: Currently this feature is not compatible with the Turbo algorithm
Frequency
?
Wiggles per second.
Higher value = more “shakiness”
Higher value = more “shakiness”
/sec
Amplitude
?
Strength of each wiggle.
Higher value = caption moves farther on each wiggle
Higher value = caption moves farther on each wiggle
px
?
Applies a random tilt to captions. Use the Randomize tilts button to refresh the tilt angle for each caption, and set a Max angle to limit how much tilt gets applied
Note: Currently this feature is not compatible with the Turbo algorithm
Note: Currently this feature is not compatible with the Turbo algorithm
Max angle
°
?
Block swear words in your captions.
Trying to download the standard profanity list again...
There was an error when getting the standard profanity list. Only the custom blocklist will work right now.
Click to retry getting standard list
Profanity list
Replace text
Mute or bleep audio
✨ New
Bleep SFX sample
✨ New
Custom blocklist (separate words with commas):
Custom allowlist (separate words with commas):
Initial opacity
%
Highlight colour
Glow colour
Outline colour
Underline colour
Thickness
px
Y-Offset
%
Box colour
Size X
px
Size Y
px
Y-Offset
%
Round
px
Opacity
%
?
Display multiple lines of captions at a time.
Lines
?
Manually adjust how captions are broken into lines. Leave unchecked to break captions automatically based on font size and sequence width.
Max words per line
words
Max characters per line
characters
?
Sometimes your transcript will have undesirable gaps between words. This feature helps you adjust the "end" times of the words in your transcript.
Extend to next word will extend the end time of each word to the start time of the next word within the caption (only useful if "Animation" is enabled above).
Extend to next caption will keep your caption visible until the next caption starts.
Extend to next word will extend the end time of each word to the start time of the next word within the caption (only useful if "Animation" is enabled above).
Extend to next caption will keep your caption visible until the next caption starts.
?
Remove punctuation and modify capitalisation of your captions.
Remove list:
Caption type
?
Whether to add your captions as a nested sequence (i.e. a separate sequence that acts like a single clip in your main sequence), or as individual caption clips.
Nested sequence:
Individual clips:
Both options have the same effects and animation features, and can be edited. Nested sequences can be double-clicked to open the underlying sequence containing individual clips.
Rendering algorithm
?
Rapid and Turbo algorithms are expected to be faster for long sequences. Please try them out and share feedback.
Please note: The Turbo algorithm will create a COPY of your sequence with a new track for your captions. If you find that this process has affected other clips in your sequence, you can copy this new track to your original sequence (but please do let us know!)
Please note: The Turbo algorithm will create a COPY of your sequence with a new track for your captions. If you find that this process has affected other clips in your sequence, you can copy this new track to your original sequence (but please do let us know!)
Target tracks
✨ New?
Choose which track(s) the captions will be inserted into. The default (and safest) behaviour is to add them to new track(s).
If you choose track(s) that already contain content, this content may be deleted and overwritten by the captions (you will get a warning popup first).
If you choose track(s) that already contain content, this content may be deleted and overwritten by the captions (you will get a warning popup first).
Save location
?
Choose where to save the caption image and data files. Options include a specific location or next to the project file.
Save preset
Edit presets
Find B-roll
?
See documentation (opens in your browser)
Insert stock video directly into your sequence
You have 5 preview B-roll videos in your sequence. When you are ready to export your sequence, click “Upgrade B-rolls” to get full resolution versions and remove watermarks.
Search for videos manually, click any search result to insert to your sequence
Search term
Library
?
Which stock media library to use for automatic B-roll
Photos provided by Pexels - click here to go to Pexels.com
Photos provided by Pixabay - click here to go to Pixabay.com
Powered by GIPHY - click here to go to GIPHY.com
Powered by ENVATO - click here to go to envato.com
Powered by ARTLIST - click here to go to artlist.com
Powered by freepik - click here to go to freepik.com
🧪 Beta
Third party libraries have their own terms of service. It is your responsibility to ensure your use case is compliant and provides any required attribution, see details on their respective websites.
Media Types
✨ NewSettings
Not available with this library
Maximum clip duration
?
Inserted B-roll clips will be limited to this duration. This may be useful if you are finding that inserted clips are too long.
If left as "Unlimited", they will expand to cover the relevant phrase.
If left as "Unlimited", they will expand to cover the relevant phrase.
Unlimited
Transition type
New
?
Inserted B-roll clips will be limited to this duration. This may be useful if you are finding that inserted clips are too long.
If left as "Unlimited", they will expand to cover the relevant phrase.
If left as "Unlimited", they will expand to cover the relevant phrase.
Transition durationNew
?
Inserted B-roll clips will be limited to this duration. This may be useful if you are finding that inserted clips are too long.
If left as "Unlimited", they will expand to cover the relevant phrase.
If left as "Unlimited", they will expand to cover the relevant phrase.
15 frames
Scaling modeNew
?
How to scale inserted media clips if their aspect ratio is different from your sequence.
Fill: fill the entire frame (but crop off the edges).
Fit: fit fully inside the frame (but may leave empty space on the sides).
Fill: fill the entire frame (but crop off the edges).
Fit: fit fully inside the frame (but may leave empty space on the sides).
Save location
?
Where to save the B-roll videos.
Search results
Click to insert at current player position in track
Find B-roll
?
See documentation (opens in your browser)
Insert stock video directly into your sequence
You have 5 preview B-roll videos in your sequence. When you are ready to export your sequence, click “Upgrade B-rolls” to get full resolution versions and remove watermarks.
Finds and inserts stock videos on a new track based on what is being spoken in your sequence.
For best results:
- Cut out any silences first!
- Ensure your audio has speech, is clear and in English
- Mute any tracks with background noise / music
B-roll frequency
Low (every ~60 seconds)
High (fully cover sequence)
Method
?
This determines what strategy to use to find the best B-roll videos.
Long context uses a longer portion of your sequence for deciding the best B-roll to use and may result in more relevant videos.
This does not mean you will necessarily end up with longer B-roll clips, just that a longer portion of your video will be taken into account.
Long context uses a longer portion of your sequence for deciding the best B-roll to use and may result in more relevant videos.
This does not mean you will necessarily end up with longer B-roll clips, just that a longer portion of your video will be taken into account.
Library
?
Which stock media library to use for automatic B-roll
Photos provided by Pexels - click here to go to Pexels.com
Photos provided by Pixabay - click here to go to Pixabay.com
Powered by GIPHY - click here to go to GIPHY.com
Powered by ENVATO - click here to go to envato.com
Powered by ARTLIST - click here to go to artlist.com
Powered by freepik - click here to go to freepik.com
🧪 Beta
Third party libraries have their own terms of service. It is your responsibility to ensure your use case is compliant and provides any required attribution, see details on their respective websites.
Media Types
✨ NewTarget track
?
Choose where to insert B-rolls. If the selected track has clips within the chosen scope, you’ll be asked to confirm clearing that track first.
Settings
Not available with this library
Maximum clip duration
?
Inserted B-roll clips will be limited to this duration. This may be useful if you are finding that inserted clips are too long.
If left as "Unlimited", they will expand to cover the relevant phrase.
If left as "Unlimited", they will expand to cover the relevant phrase.
Unlimited
Transition type
New
?
Inserted B-roll clips will be limited to this duration. This may be useful if you are finding that inserted clips are too long.
If left as "Unlimited", they will expand to cover the relevant phrase.
If left as "Unlimited", they will expand to cover the relevant phrase.
Transition durationNew
?
Inserted B-roll clips will be limited to this duration. This may be useful if you are finding that inserted clips are too long.
If left as "Unlimited", they will expand to cover the relevant phrase.
If left as "Unlimited", they will expand to cover the relevant phrase.
15 frames
Scaling modeNew
?
How to scale inserted media clips if their aspect ratio is different from your sequence.
Fill: fill the entire frame (but crop off the edges).
Fit: fit fully inside the frame (but may leave empty space on the sides).
Fill: fill the entire frame (but crop off the edges).
Fit: fit fully inside the frame (but may leave empty space on the sides).
Scope
?
Which part of your sequence to operate on. If using "In/Out points", you MUST set an "In point" and an "Out point" on your sequence (hotkeys:
I and O)
Save location
?
Where to save the B-roll videos.
Language
?
This is the language of your audio. Please note non-English support is currently experimental. For convenience, you can set the default language in the Settings menu to avoid changing this every time.
Find B-roll
?
See documentation (opens in your browser)
To change any video, select the corresponding search term below.
You have 5 preview B-roll videos in your sequence. When you are ready to export your sequence, click “Upgrade B-rolls” to get full resolution versions and remove watermarks.
car crash
car crash
car crash
Find B-roll
?
See documentation (opens in your browser)
See below the attribution information for the B-rolls found in your timeline. Please note this is an experimental feature and attribution information may not be exhaustive. It is your responsibility to ensure you follow the terms of any stock libraries used.
Include:
[start-end]
name
(url)
[start-end] name (url)
[start-end] name (url)
[start-end] name (url)
[start-end] name (url)
Find B-roll
?
See documentation (opens in your browser)
Click any video to swap it in the sequence.
car crash
Select
Select
Personal B-roll library
?
See documentation (opens in your browser)
Manage your personal B-roll library:
- Add videos and tag them (tags can be detected automatically)
- These videos will be used when using the “Personal library” option
Add videos to library
?
Start here! Add videos to your personal B-roll library. Videos can always be removed later.
Manage tags
?
Use this feature to automatically tag any videos that are missing tags. Tags can always be modified later.
Note: there is a monthly limit on how many videos can be tagged automatically through this feature. Any further videos can be tagged manually.
Note: there is a monthly limit on how many videos can be tagged automatically through this feature. Any further videos can be tagged manually.
Monthly auto-detection usage: 0/100 videos
Library
?
Your personal B-roll library. These videos are used when the "Personal library" option is selected in the Find B-roll feature.
Feel free to edit tags or remove videos, or even export the library data for safe-keeping / if you want to swap out libraries.
Feel free to edit tags or remove videos, or even export the library data for safe-keeping / if you want to swap out libraries.
| MEDIA FILE | TAGS |
|---|
Find music
?
See documentation (opens in your browser)
Insert music directly into your sequence, in partnership with
Finds and inserts music on a new track based on your video.
For best results:
- Cut out any silences first!
- Ensure your audio has speech, is clear and in English
Scope
?
Which part of your sequence to operate on. If using "In/Out points", you MUST set an "In point" and an "Out point" on your sequence (hotkeys:
I and O)
Min clip duration
Low
High
Library
?
Which stock media library to use for automatic B-roll
Target audio track
?
Music clips will be added to this track. Any existing clips on this track may be deleted in the process.
Save location
?
Where to save the music files.
Results
Trembling Sky
0:00/
Find music
?
See documentation (opens in your browser)
Insert music directly into your sequence, in partnership with
Search for music manually, click any search result to add it to your sequence.
Search
Genre
Mood
BPM
?
Filter search results by music tempo (in beats per minute)
—-— bpm
Duration
—-— sec
Target audio track
?
Music clips will be added to this track. Any existing clips on this track may be deleted in the process.
Save location
?
Where to save the music files.
YouTube Channel Whitelist
?
Manage whitelisted YouTube channels for music usage
Manage which YouTube channels are whitelisted for music usage in your projects.
Add YouTube Channel
Enter a YouTube Channel ID to whitelist it for music usage.
?
To find a YouTube Channel ID:
Channel IDs usually start with 'UC' followed by alphanumeric characters.
Usually starts with 'UC' followed by alphanumeric characters
Whitelisted Channels
Currently whitelisted YouTube channels
Loading...
No channels whitelisted yet.
Create highlights
Finds the best highlight moments in a long video, which can be turned into short vertical videos for TikTok, Instagram Reels and YouTube Shorts.
Number of highlights
?
Approximate number of highlights to look for per hour of footage. If footage is shorter, fewer highlights will be found. If footage is longer, more highlights will be found.
Low (~5 per hour of footage)
High (~20 per hour of footage)
Highlight duration
?
Target duration for each detected highlight. Note: Start/end times of highlights can be modified later.
5 seconds
120 seconds
Scope
?
Which part of your sequence to operate on. If using "In/Out points", you MUST set an "In point" and an "Out point" on your sequence (hotkeys:
I and O)
Accuracy
?
Improves accuracy of the start/end times for each highlight, however this requires additional processing and takes longer.
Language
?
This is the language of your audio. Please note non-English support is currently experimental. For convenience, you can set the default language in the Settings menu to avoid changing this every time.
Edit highlights
Finds the best highlight moments in a long video, which can be turned into short vertical videos for TikTok, Instagram Reels and YouTube Shorts.
3 highlights found
Automatically marked in your sequence with red chapter markers
![]()
- To find a highlight in your sequence: Click on any highlight below
- To modify a highlight: Move the red chapter markers in your sequence
- To remove a highlight: Click the “X” button next to it
- To add a new highlight: Select a portion of your sequence with In/Out points and click the “+ Add new highlight” button below
Settings
?
Re-frames to short-form vertical format (9:16 aspect ratio). We provide 2 re-framing methods:
1. Premiere Pro auto-reframe: Uses Premiere Pro's in-built "Auto Reframe" effect to focus on the portion of your video that has the most motion. Select from "slower", "default" or "faster" options to control the speed of the motion tracking.
2. Custom re-framing: Manually specify which "viewboxes" to focus on from your video. You may choose up to 3 viewboxes. FireCut will give you a suggested framing based on positions of faces in your video, but you can change this.
1. Premiere Pro auto-reframe: Uses Premiere Pro's in-built "Auto Reframe" effect to focus on the portion of your video that has the most motion. Select from "slower", "default" or "faster" options to control the speed of the motion tracking.
2. Custom re-framing: Manually specify which "viewboxes" to focus on from your video. You may choose up to 3 viewboxes. FireCut will give you a suggested framing based on positions of faces in your video, but you can change this.
Motion tracking speed
Detecting best viewboxes...
...
Views
2
Resetting frame...
1
?
Generates descriptions for highlights to be used on social media platforms.
?
Create a new sequence for each highlight
Unable to create highlights as they are overlapping
Create highlights
Finds the best highlight moments in a long video, which can be turned into short vertical videos for TikTok, Instagram Reels and YouTube Shorts.
You have 5 preview B-roll videos in your sequence. When you are ready to export your sequence, click “Upgrade B-rolls” to get full resolution versions and remove watermarks.
3 highlights found
Settings
Loading settings...
Enter a valid license key
License key
VerifiedPlan:
(manage
)
Usage: [unknown]/[unknown] hrs
App version:
Achievements
Other settings
Default audio language
?
Enable this setting to speed up performance by reusing results from previous analysis when possible. When a previous result is used, it is not counted against your monthly usage limit.
Temporary files size:
Editor settings
Default zoom
%
Share feedback
Type
Feedback
- Briefly describe the issue you encountered.
- What steps led to this issue?
- Any additional details or observations?
- Could you send screenshots or a quick video to support@firecut.ai
Please enter feedback description
See FireCut feedback board
🙏
Sent! Thank you
See FireCut feedback board
Help
Help options open in your default browser.
Video
Adjust the selected video clip's properties here.
Video properties
resetPosition X
%
Position Y
%
Rotation
°
Scale
%
Scale Y
%
Click here to change this B-roll clip
Audio
Adjust the selected audio clip's properties here.
Audio properties
resetTrack Volume
%
Clip Volume
%
Clip transcript:
Edit Zoom
Adjust the selected zoom's properties here.
Zoom style
resetScale
%
Center point
Default position
Duration
sec
Remove profanity
?
See documentation (opens in your browser)
Finds and removes profanity (curse words) from your video.
For best results, first:
- Remove unnecessary silences
- Remove repetitions
Scope
?
Which part of your sequence to operate on. If using "In/Out points", you MUST set an "In point" and an "Out point" on your sequence (hotkeys:
I and O)
Language
?
Remove profanity
?
See documentation (opens in your browser)
Finds and removes profanity (curse words) from your video. Note: This feature will mute or bleep ALL audio tracks, and can unlink your audio/video clips.
Trying to download the standard profanity list again...
There was an error when getting the standard profanity list. Only the custom blocklist will work right now.
Click to retry getting standard list
Profanity list
Mute or bleep audio
Bleep SFX sample
Custom blocklist (separate words with commas):
Custom allowlist (separate words with commas):
3
words found
Below you can see the list of detected words in context
- Click on any word to go to that time in the sequence
- Use the checkbox to mark / unmark that word for removal
|
TIME
WORD (IN CONTEXT)
|
MUTE
|
|---|
Full transcript
Full transcript
Add voiceover
?
See documentation (opens in your browser)
Convert your text into natural-sounding speech with customizable voices and settings.
Credits usage
Remaining characters
0
characters
Required for this generation
0 characters
Enter your text
0 characters
Estimated audio length: 0 seconds
Voice settings
Voice type
Speed
?
Controls the speed of the generated speech. Lower values create slower, more deliberate speech while higher values produce faster-paced speech.
1.0
x
Language
Stability
?
Determines how stable the voice is and the randomness between each generation. Lower values introduce broader emotional range for the voice. Higher values can result in a monotonous voice with limited emotion.
0.5
x
Similarity boost
?
Determines how closely the AI should adhere to the original voice when attempting to replicate it.
0.7
x
Style
?
Determines the style exaggeration of the voice. This setting attempts to amplify the style of the original speaker.
0
x
Enable speaker boost
?
This setting boosts the similarity to the original speaker. Using this setting requires a slightly higher computational load, which in turn increases latency.
Output settings
Insert on audio track
Save location
